NANJING AUTO E&T CO., LTD.
NANJING AUTO E&T CO., LTD.
Add to Cart
PCD stone engraving tool for engrave characters on granite, marble and ceramic
Features of PCD Engraving Cutter for Stone
1. The PCD cutter is used to engrave characters with smooth edges.
2. The size of the engraving characters ranges from 3cm to 8cm
3. Fast engraving speed and long service life
4. Its maximum engraving depth can reach 4mm.
|
| |||||
| Model | size | Shk(mm) | Half Angle | CED | Ovl(mm) |
| KA-4502 | 6*40*45*0.2 | 6.0mm | 45° | 0.20 | 40 |
| KA-4504 | 6*40*45*0.4 | 6.0mm | 45° | 0.40 | 40 |
| NB-4506 | 6*40*45*0.6 | 6.0mm | 45° | 0.60 | 40 |
| NB-4508 | 6*40*45*0.8 | 6.0mm | 45° | 0.80 | 40 |
| NB-4510 | 6*40*45*1.0 | 6.0mm | 45° | 1.00 | 40 |
| NB-4512 | 6*40*45*1.2 | 6.0mm | 45° | 1.20 | 40 |
| NB-4515 | 6*40*45*1.5 | 6.0mm | 45° | 1.50 | 40 |
| NB-4520 | 6*40*45*2.0 | 6.0mm | 45° | 2.00 | 40 |
| NB-3502 | 6*40*35*0.2 | 6.0mm | 35° | 0.20 | 40 |
| NB-3504 | 6*40*35*0.4 | 6.0mm | 35° | 0.40 | 40 |
| NB-3508 | 6*40*35*0.8 | 6.0mm | 35° | 0.80 | 40 |
| NB-3510 | 6*40*35*1.0 | 6.0mm | 35° | 1.00 | 40 |
| NB-3512 | 6*40*35*1.2 | 6.0mm | 35° | 1.20 | 40 |
| NB-3515 | 6*40*35*1.5 | 6.0mm | 35° | 1.50 | 40 |
| NB-3520 | 6*40*35*2.0 | 6.0mm | 35° | 2.00 | 40 |
| NB-3002 | 6*40*30*0.2 | 6.0mm | 30° | 0.20 | 40 |
| NB-3004 | 6*40*30*0.4 | 6.0mm | 30° | 0.40 | 40 |
| NB-3006 | 6*40*30*0.6 | 6.0mm | 30° | 0.60 | 40 |
| NB-4002 | 6*40*35*2.0 | 6.0mm | 35° | 2.00 | 40 |
| NB-4004 | 6*40*35*0.4 | 6.0mm | 35° | 0.40 | 40 |
| NB-4006 | 6*40*35*0.6 | 6.0mm | 35° | 0.60 | 40 |
| NB-22502 | 6*40*22.5*0.2 | 6.0mm | 22.5° | 0.20 | 40 |
| NB-22504 | 6*40*22.5*0.4 | 6.0mm | 22.5° | 0.40 | 40 |